In addition to QC-Series Inclinometer Casing is available in different styles including Shear Wire (left), Standard (center) and EPIC (right)

Inclinometer Casing is available in three standard sizes: 1-15/16-inch (48mm), 2-3/4-inch (70mm), 3-3/4-inch (95.2mm) Outside Diameter

Q-Series Inclinometer Casing

Inclinometer Casing

Available from USExploration Equipment Company and comes in two distinct styles – “Standard” (glue and rivet style) and “QC-Series” with precision grooves and flush self-sealing joints.

This unique product maintains access to the bore hole for the “probe” while also controlling the orientation of the “probe” and finally conforms to the movement of the surrounding ground.

The accuracy of the inclinometer measurements are directly influenced by the quality of the casing grooves - that is why the QC-Series offers precision grooves with the convenience of self-sealing joints and snap-together coupling.

When ordering inclinometer casing, always consider diameter, groove shape and coupling style.

Complete Pitcher Barrel Style Sampler Assembly with 3-inch (76.2mm) Tube

“Pitcher Barrel” Samplers

Available from USExploration Equipment Company.

This unique design combines a thin-walled tube (protruding out the bottom face) with the ability for over-coring (see cutter teeth near the tube bottom).

The tube is on a spring-loaded mechanism that will compress if hard soils are encountered.

The tube stays extended in soft soils, but is pushed back into the cutter barrel in hard soils.

In difficult soils, the cutter advances the hole and the tube is protected against buckling.

The Picher Barrel Sampler is designed specifically to recover accurate samples from formations that are too hard for thin-wall “Shelby Tube” samplers or too brittle, soft or water-sensitive to permit satisfactory recovery by conventional core barrel type samplers.

Standard Split Barrel Sampler Assembly Head (Top), Split Barrel (Center) & Shoe with Trap (Bottom)

“Standard” Style Split Barrel Samplers

Available from USExploration Equipment Company.

This long standing design has proven to be a very effective geo-environmental sample collection tool and consists of a Shoe, Split Barrel and Head.

The sampler head is the top of the assembly and can easily connect to either W-Design or J-Series drill rod.

The heat treated Shoe comes in either a sharp (ASTM) or blunt (Terzaghi) configurations and can be threaded to the bottom of the Split Barrel with a 4-TPI (coarse) coupling.

When ordering an assembly, match your desired assembly outside diameter, actual sample diameter, sample length and drill rod connection that works best on your job site.

Wooden Knockout Plug for Hollow Stem Auger Cutterheads

PVC Knockout Plug for Hollow Stem Auger Cutterheads

Cast Steel Drop-Off Tip Fits GP-63 Sonic Casing

Stainless Steel Drop-Off Tip Fits GP-88 Sonic Casing

Molded Plastic Drop-Off Tip Fits GP-100 Sonic Casing

Expendable Steel Points with O-Rings in 1.25” (32mm), 2.25” (57mm) and 3.25” (83mm) for Direct Push tooling applications

Drop-Off Tips, Disposable Points, Wooden & PVC “Knockout” Plugs – All are available from USExploration Equipment Company.

For your Compact-Sonic (CS), Compact-Roto-Sonic (CRS), Direct Push (DPT) and Hollow Stem Auger drilling applications, when keeping overburden “slough” out of your “casing” long enough to install a monitoring well or geothermal system through the annular space in tool string.

Each has a specific application and not all assemblies are interchangeable across tooling systems, but when you need to advance a casing to (TD) depth, install a well or loop and then backfill the bore hole with material while extracting your tool string – we have the “plug” for you.

Brass Liner - Split Barrel Sampler

Dual Tube Liner with Cap

Macro-Core Liners

Sample Barrel Liners

Available from USExploration Equipment Company for a wide range of down-hole sampling equipment including Lynac or California style split barrels, Macro-Core or Dual Tube Direct Push style solid barrels.

Whether it is brass, clear plastic, with a basket trap or without, 5-foot (1.5m) or 4-foot (1.2m) long - we stock it and can ship to you the same day.

Shelby Tubes (above) come in a wide range of diameters, lengths & require Set Screws to attach them to the Head Assembly

Shelby Tube (Thinwall) Samplers & Accessories Available from USExploration Equipment Company in Steel, Brass and Galvanized.

The “push style” sampler recovers “in-situ” samples in 2-inch (51mm), 2-1/2-inch (63.5mm), 3-inch (76.2mm) and 5-inch (127mm) diameters.

Easily capped and sent to the lab for analysis, this long standing ASTM approved sampling tool has experienced resurgence as a result of heightened awareness of environmental issues.

Sampler assemblies or extra Tubes, Heads, Cap (Set) Screws, Bee’s Wax (Slabs) and Plastic Caps are all available from our stock.

"California” Samplers consist of a Shoe, a Split Barrel, a Waste (Slough) Barrel (above the Split assembly) and a Head.

“California” Style Split Barrel Samplers

Available from USExploration Equipment Company.

This unique design utilizes a Waste (Slough) Barrel between the top of the Split Barrel & below the (Back) Head (Sub) Assembly, allowing the user to get a more representative sample, after discarding the first six inches.

The thin-wall design lends itself to using Brass (Ring style) Liners or Clear Plastic, should that also be required.

Our preferred assembly is supplied with coarse (4-TPI) threads on the Shoe, Split Barrel, Waste Barrel & Head, so this innovative sampling tool does well in the field in all kinds of overburden applications.

Simply match your desired outside diameter, with the required sample length & drill rod connection when ordering.

"Lynac" Split Barrel Sampler

Plastic Basket (sand) Traps (catchers) are available in White, Blue, Orange, Red & Yellow depending on material conditions & hardness

Replacement Shoes are available in sharp (ASTM) or blunt (Terzaghi) configurations, depending on driller preference.

"Lynac" Style Split Barrel Samplers

Available from USExploration Equipment Company.

The premier geotech sampler assembly consists of a shoe, split barrel & head.

The 2-inch (50.8mm) outside diameter recovers a sample that is 1-1/2-inch (38.1mm) outside diameter x 24-inches (609.6mm) long.

The sampler head is the top of the assembly and can easily connect to either W-Design or J-Series drill rod.

The heat treated shoe comes in either a sharp (ASTM) or blunt (Terzaghi) configuration & can be threaded to the bottom of the split barrel with a 4-TPI (coarse) or 8-TPI (fine) coupling.

When ordering an assembly, match your desired drill rod connection & thread type that works best in your geology.

Plastic Basket (sand) Traps (catchers) are available in White, Blue, Orange, Red & Yellow depending on material conditions & hardness

Replacement Shoes are available in sharp (ASTM) or blunt (Terzaghi) configurations, depending on driller preference.

Plastic Basket (sand) Traps (catchers) are available in White, Blue, Orange, Red & Yellow depending on material conditions & hardness

Replacement Shoes are available in sharp (ASTM) or blunt (Terzaghi) configurations, depending on driller preference.