Rotary Tools Content
Flush Joint Steel Casing
|
DCDMA W-Design Flush Joint Casing & Accessories – are available from USExploration Equipment Company & come in two distinct styles – “single use” type with non-heat treated tool joints or “multi-use” type with heat treated tool joints. Flush joint casing is part of any effective strategy for sealing off overburden, weathered surface formations & large boulders when hollow stem augers are not an option. Casing permits drilling fluids to circulate & return cuttings to the surface. All sizes are specified by DCDMA Standards to allow nesting or telescoping & interchangeability between brands. When ordering simply match your desired inside diameter with your required lengths & specify “single use” or “multi-use” to fit your down-hole application…
Back to Top PDF |
DCDMA
Casing Type |
Outside Diameter |
Inside Diameter |
Threads
Per Inch |
Assembly
Length |
Assembly
Part Number |
AW |
2-1/4-inch
(57mm) |
1-29/32-inch
(48.4mm) |
4-TPI |
2-Foot
(610mm) |
AWC-RH-02 |
AW |
2-1/4-inch
(57mm) |
1-29/32-inch
(48.4mm) |
4-TPI |
3-Foot
(914.4mm) |
AWC-RH-03 |
AW |
2-1/4-inch
(57mm) |
1-29/32-inch
(48.4mm) |
4-TPI |
5-Foot
(1.5m) |
AWC-RH-05 |
AW |
2-1/4-inch
(57mm) |
1-29/32-inch
(48.4mm) |
4-TPI |
10-Foot
(3m) |
AWC-RH-10 |
BW |
2-7/8-inch
(73mm) |
2-3/8-inch
(60.3mm) |
4-TPI |
2-Foot
(610mm) |
BWC-RH-02 |
BW |
2-7/8-inch
(73mm) |
2-3/8-inch
(60.3mm) |
4-TPI |
3-Foot
(914.4mm) |
BWC-RH-03 |
BW |
2-7/8-inch
(73mm) |
2-3/8-inch
(60.3mm) |
4-TPI |
5-Foot
(1.5m) |
BWC-RH-05 |
BW |
2-7/8-inch
(73mm) |
2-3/8-inch
(60.3mm) |
4-TPI |
10-Foot
(3m) |
BWC-RH-10 |
NW |
3-1/2-inch
(89mm) |
3-inch
(76.2mm) |
4-TPI |
2-Foot
(610mm) |
NWC-RH-02 |
NW |
3-1/2-inch
(89mm) |
3-inch
(76.2mm) |
4-TPI |
3-Foot
(914.4mm) |
NWC-RH-03 |
NW |
3-1/2-inch
(89mm) |
3-inch
(76.2mm) |
4-TPI |
5-Foot
(1.5m) |
NWC-RH-05 |
NW |
3-1/2-inch
(89mm) |
3-inch
(76.2mm) |
4-TPI |
10-Foot
(3m) |
NWC-RH-10 |
HW |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
4-TPI |
2-Foot
(610mm) |
HWC-RH-02 |
HW |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
4-TPI |
3-Foot
(914.4mm) |
HWC-RH-03 |
HW |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
4-TPI |
5-Foot
(1.5m) |
HWC-RH-05 |
HW |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
4-TPI |
10-Foot
(3m) |
HWC-RH-10 |
PW |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
3-TPI |
2-Foot
(610mm) |
PWC-RH-02 |
PW |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
3-TPI |
3-Foot
(914.4mm) |
PWC-RH-03 |
PW |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
3-TPI |
5-Foot
(1.5m) |
PWC-RH-05 |
PW |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
3-TPI |
10-Foot
(3m) |
PWC-RH-10 |
SW |
6-5/8-inch
(168mm) |
6-inch
(152.4mm) |
3-TPI |
2-Foot
(610mm) |
SWC-RH-02 |
SW |
6-5/8-inch
(168mm) |
6-inch
(152.4mm) |
3-TPI |
3-Foot
(914.4mm) |
SWC-RH-03 |
SW |
6-5/8-inch
(168mm) |
6-inch
(152.4mm) |
3-TPI |
5-Foot
(1.5m) |
SWC-RH-05 |
SW |
6-5/8-inch
(168mm) |
6-inch
(152.4mm) |
3-TPI |
10-Foot
(3m) |
SWC-RH-10 |
DCDMA Casing Type |
Wireline Type Casing Advancer |
Assembly Part Number |
BW |
Yes |
59090 |
NW |
Yes |
59000 |
DCDMA Casing Type |
Casing Shoe
Cutting Surface |
Threads Per Inch |
Assembly
Part Number |
AW |
Standard
Heat Treated |
4-TPI |
AW-RH-DS |
AW |
Diamond Impregnated |
4-TPI |
AWC-DS-RH-DI |
AW |
Chunky-Carbide
“Devils Nightmare” |
4-TPI |
AWC-DS-RH-DN |
BW |
Standard
Heat Treated |
4-TPI |
BWC-RH-DS |
BW |
Diamond Impregnated |
4-TPI |
BWC-DS-RH-DN |
BW |
Chunky-Carbide
“Devils Nightmare” |
4-TPI |
BWC-DS-RH-DN |
NW |
Standard
Heat Treated |
4-TPI |
NWC-DS-RH |
NW |
Diamond Impregnated |
4-TPI |
NWC-DS-RH-DI |
NW |
Chunky-Carbide
“Devils Nightmare” |
4-TPI |
NWC-DS-RH-DN |
HW |
Standard
Heat Treated |
4-TPI |
HWC-DS-RH |
HW |
Diamond Impregnated |
4-TPI |
HWC-DS-RH-DI |
HW |
Chunky-Carbide
“Devils Nightmare” |
4-TPI |
HWC-DS-RH-DN |
PW |
Standard
Heat Treated |
3-TPI |
PWC-DS-RH |
PW |
Diamond Impregnated |
3-TPI |
PWC-DS-RH-DI |
PW |
Chunky-Carbide
“Devils Nightmare” |
3-TPI |
PWC-DS-RH-DN |
SW |
Standard
Heat Treated |
3-TPI |
SWC-DS-RH |
SW |
Diamond Impregnated |
3-TPI |
SWC-DS-RH-DI |
SW |
Chunky-Carbide
“Devils Nightmare” |
3-TPI |
SWC-DS-RH-DN |
T-Series Flush Joint Casing & Accessories – are available from USExploration Equipment Company & come in one style – “multi-use” type with heat treated tool joints. This tapered, coarse threaded, flush joint casing has tremendous advantages over W-Design because it works vertically & really pays for itself at an angle. It too is a very effective strategy for sealing off overburden, weathered surface formations & large boulders when hollow stem augers are not an option. Casing permits drilling fluids to circulate & return cuttings to the surface. When ordering simply match your desired inside diameter with your required length to fit your down-hole application…
Back to Top PDF |
DCDMA
Casing Type |
Outside Diameter |
Inside Diameter |
Threads
Per Inch |
Assembly
Length |
Assembly
Part Number |
HWT |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
2-1/2-TPI |
2-Foot
(610mm) |
HWT-RH-02 |
HWT |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
2-1/2-TPI |
5-Foot
(1.5m) |
HWT-RH-05 |
HWT |
4-1/2-inch
(114.3mm) |
4-inch
(101.6mm) |
2-1/2-TPI |
10-Foot
(3m) |
HWT-RH-10 |
PWT |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
2-1/2-TPI |
2-Foot
(610mm) |
PWT-RH-02 |
PWT |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
2-1/2-TPI |
5-Foot
(1.5m) |
PWT-RH-05 |
PWT |
5-1/2-inch
(139.7mm) |
5-inch
(127mm) |
2-1/2-TPI |
10-Foot
(3m) |
PWT-RH-10 |
T-Series Casing Type |
Wireline Type Casing Advancer |
Assembly Part Number |
HWT |
Yes |
3000863 |
PWT |
Yes |
3543991 |
DCDMA
Casing Type |
Casing Shoe Cutting Surface |
Threads
Per Inch |
Assembly
Part Number |
HWT |
Standard
Heat Treated |
2-1/2-TPI |
HWT-DS-RH |
HWT |
Diamond Impregnated |
2-1/2-TPI |
HWT-DS-RH-DI |
HWT |
Chunky-Carbide
“Devils Nightmare” |
2-1/2-TPI |
HWT-DS-RH-DN |
PWT |
Standard
Heat Treated |
2-1/2-TPI |
PWT-DS-RH |
PWT |
Diamond Impregnated |
2-1/2-TPI |
PWT-DS-RH-DI |
PWT |
Chunky-Carbide
“Devils Nightmare” |
2-1/2-TPI |
PWT-DS-RH-DN |
Parts for your Moyno Pump & complete L-Series Assemblies – are available from USExploration Equipment Company to help keep that fluid circulating at the drill site. Rotors, Stators, Packing Sets, Bushings, Bearings, Drive Shafts, Connecting Rod Kits, Mounting Frames and complete 2L-Series or 3L-Series Pumping Stations, either shipped loose or installed at our Indianapolis facility are just a phone call away. When ordering repair parts simply specify the pump model (2L4, 2L6, 3L4, 3L6 and 3L8) and the appropriate subassembly and we will handle the rest…
|
|
Replacement Parts for your Moyno Pump |
Complete L-Series Pumps available from stock |
Back to Top
PDF |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Rotor |
32006 |
32030 |
32054 |
32078 |
32102 |
Rotor Band |
32017 |
32041 |
32065 |
32089 |
32113 |
Stator |
32005 |
32029 |
32053 |
32077 |
32101 |
Stator Support |
32013 |
32037 |
32061 |
32085 |
32109 |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Connecting Rod Kit with Rod, Rotor & Main Drive Shaft Pin, Washers, Screws & Rotor Band |
32024 |
32048 |
32072 |
32096 |
32120 |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Suction Housing (Body) |
32002 |
32026 |
32050 |
32073 |
32098 |
Suction Body (Pump) Support |
32012 |
32036 |
32060 |
32084 |
32108 |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Reducer |
32004 |
32028 |
32052 |
32076 |
32100 |
Main Drive Shaft |
32007 |
32031 |
32055 |
32079 |
32103 |
Main Drive Shaft Collar |
32016 |
32040 |
32064 |
32088 |
32112 |
Main Drive Shaft Collar Pin Retainer |
32134 |
32135 |
32136 |
32137 |
32132 |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Bearing - Radial |
32008 |
32032 |
32056 |
32080 |
32104 |
Seal – Radial, Grease Type |
32021 |
32045 |
32069 |
32093 |
32117 |
Bearing - Thrust |
32009 |
32033 |
32057 |
32081 |
32105 |
Seal – Thrust, Grease Type |
32022 |
32046 |
32070 |
32094 |
32118 |
Bearing Housing |
32003 |
32027 |
32051 |
32075 |
32099 |
Bearing Spacer |
32010 |
32034 |
32058 |
32082 |
32106 |
Bearing Cover Plate |
32011 |
32035 |
32059 |
32083 |
32107 |
Bearing Lock Nut |
32019 |
32043 |
32066 |
32091 |
32115 |
Bearing Lock Nut Washer |
32020 |
32044 |
32068 |
32092 |
32116 |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Packing Gland |
32014 |
32038 |
32062 |
32086 |
32110 |
Packing Gland Insert |
32023 |
32047 |
32071 |
32095 |
32119 |
Packing Kit |
32015 |
32039 |
32063 |
32087 |
32111 |
Lantern Ring |
32018 |
32042 |
32066 |
32090 |
32114 |
Description |
Moyno 2L4 |
Moyno 2L6 |
Moyno 3L4 |
Moyno 3L6 |
Moyno 3L8 |
Complete Pump Assembly |
32001 |
32025 |
32049 |
32074 |
32097 |
Tri-Cone & Chevron Style (Drag) Bits & Accessories – are available from USExploration Equipment Company – whether it is a 3-Wing or 4-Wing Drag (Chevron) Bit, Tri-Cone Roller Rock Bit, made-to-order Stabilizer or DTH Bit, we can deliver…
|
|
|
|
Chevron Drag Bit |
Tri-Cone Bit |
DTH Bits |
Custom Built Stabilizers |
Back to Top PDF |
Tri-Cone Bit Hole Size |
Assembly
Weight |
Steel Tooth
or
Tungsten Carbide |
Pin Up Connection |
Assembly
Part Number |
2-7/8-inch
(73mm) |
3-Pounds
(1.4 kg) |
Steel Tooth |
N-4 |
27106 |
2-15/16-inch
(75mm) |
3-Pounds
(1.4 kg) |
Steel Tooth |
N-4 |
27100 |
2-15/16-inch
(75mm) |
3-Pounds
(1.4 kg) |
Tungsten Carbide |
N-4 |
27100-TC-N4 |
3-1/4-inch
(83mm) |
5-Pounds
(2.3 kg) |
Tungsten Carbide |
N-4 |
27103-TC-N4 |
3-1/8-inch
(79mm) |
4-Pounds
(1.8 kg) |
Steel Tooth |
N-4 |
27102-ST-N4 |
3-7/8-inch
(98.4mm) |
6-Pounds
(2.7 kg) |
Steel Tooth |
2-3/8” API Regular |
27113-ST-2375 |
3-7/8-inch
(98.4mm) |
6-Pounds
(2.7 kg) |
Tungsten Carbide |
2-3/8” API Regular |
27113-TC-2375 |
4-inch
(102mm) |
8-Pounds
(3.6 kg) |
Steel Tooth |
2-3/8” API Regular |
27105 |
4-1/2-inch
(89mm) |
9-Pounds
(4.1 kg) |
Tungsten Carbide |
2-3/8” API Regular |
27117-TC-2375 |
5-1/8-inch
(130mm) |
21-Pounds
(9.5 kg) |
Tungsten Carbide |
2-7/8” API Regular |
27116-TC-2875 |
5-5/8-inch
(143mm) |
22-Pounds
(10 kg) |
Tungsten Carbide |
3-1/2” API Regular |
27118-TC-0350 |
5-7/8-inch
(149.2mm) |
23-Pounds
(10.4 kg) |
Steel Tooth |
3-1/2” API Regular |
27119-ST-0350 |
5-7/8-inch
(149.2mm) |
23-Pounds
(10.4 kg) |
Tungsten Carbide |
3-1/2” API Regular |
27119-TC-0350 |
6-inch
(152mm) |
23-Pounds
(10.4 kg) |
Steel Tooth |
3-1/2” API Regular |
27114 |
7-7/8-inch
(200mm) |
|
Steel Tooth |
4-1/2” API Regular |
27112-ST-0450 |
9-7/8-inch
(251mm) |
|
Steel Tooth |
6-5/8” API Regular |
27120-ST-6625 |
12-1/4-inch
(311mm) |
|
Steel Tooth |
6-5/8” API Regular |
27121-ST-6625 |
Chevron Style (Drag) Bit Hole Size |
Assembly
Weight |
3-Wing or 4-Wing |
Pin Up Connection |
Assembly
Part Number |
2-15/16-inch
(75mm) |
4-Pounds
(1.8 kg) |
3-Wing |
N-4 |
27107 |
3-inch
(76.2mm) |
4-Pounds
(1.8 kg) |
3-Wing |
NW |
27108 |
3-5/8-inch
(92mm) |
6-Pounds
(2.7 kg) |
3-Wing |
N-4 |
27104 |
3-7/8-inch
(98.4mm) |
6-Pounds
(2.7 kg) |
3-Wing |
2-3/8” API Regular |
27117 |
4-1/2-inch
(89mm) |
8-Pounds
(3.6 kg) |
3-Wing |
2-3/8” API Regular |
27104 |
5-1/2-inch
(140mm) |
17-Pounds
(7.7 kg) |
3-Wing |
2-7/8” API Regular |
27118 |
6-inch
(152mm) |
19-Pounds
(8.6 kg) |
3-Wing |
3-1/2” API Regular |
27115 |
Custom Built Stabilizer
Length |
Largest Outside Diameter |
Top Connection |
Bottom Connection |
Special Feature |
Assembly Part Number |
30-inch
(762mm) |
9-7/8-inch
(251mm) |
3-1/2” API Regular
Pin |
6-5/8” API Regular
Box |
Smooth OD
Bottle-Necked
Wrench Flats
On Box End |
27124 |
12-Foot
(3.7 m) |
9-7/8-inch
(251mm) |
2-7/8” API
Regular
Box |
6-5/8” API Regular
Box |
Wrench Flats
On Both Ends |
27110 |
DTH Style Bit Hole Size |
Assembly
Weight |
Bit Face Design |
Pin Up Connection |
Assembly
Part Number |
7-7/8-inch
(200mm) |
|
Concave Type |
360-Degree Shank |
27109 |
Drill Pipe with Wrench Flats at Both Ends & API Tool Joints
Drill Pipe with No Wrench Flats & API Tool Joints
|
Drill Pipe with API Tool Joints – are available from USExploration Equipment Company including API Regular, API Internal Flush (IF) and API Full-Hole. Drill Pipes can be manufactured with wrench flats at one end or at both ends, depending on your preference and the breakout system on your existing machine. When ordering simply specify the outside diameter, the desired thread type, and the shoulder-to-shoulder length that best fits your “top-head” or “table” drive drill rig…
Back to Top PDF |
Drill Pipe
Outside Diameter |
Assembly Length |
Thread Type |
Special Feature |
Assembly
Part Number |
2-7/8-inch
(73mm) |
5-Foot
(1.5m) |
2-3/8” Mayhew Junior Pin
x
2-3/8” API Regular Box |
Wrench Flats
Box & Pin End |
27137 |
2-7/8-inch
(73mm) |
10-Foot
(3m) |
2-3/8” Mayhew Junior |
Wrench Flats
Box & Pin End |
27138 |
3-1/2-inch
(89mm) |
1-Foot
(305mm) |
2-3/8” API IF |
No Wrench Flats |
27155 |
3-1/2-inch
(89mm) |
2-Foot
(610mm) |
2-3/8” API IF |
No Wrench Flats |
27156 |
3-1/2-inch
(89mm) |
10-Foot
(3m) |
2-3/8” API IF |
Wrench Flats
Box & Pin End |
27157 |
3-1/2-inch
(89mm) |
10-Foot
(3m) |
2-3/8” API IF |
Wrench Flats
Box End |
27158 |
3-1/2-inch
(89mm) |
20-Foot
(6m) |
2-3/8” API IF |
Wrench Flats
Box & Pin End |
27159 |
3-1/2-inch
(89mm) |
20-Foot
(6m) |
2-3/8” API IF |
Wrench Flats
Box End |
27160 |
4-1/2-inch
(114.3mm) |
20-Foot
(6m) |
2-7/8” API IF |
Wrench Flats
Box End |
27131 |
Sideport & Top Mount Water Swivels – are available from USExploration Equipment Company. Whether you are making a simple 5-foot (1.5m) “core run” at the bottom of the hole, doing air/ mud rotary, deep wireline coring or recovering a pavement core roadside, we have the correct Swivel for your application. Typically the Sideport version is limited to smaller diameters and depths, because the water course is typically smaller, so flow is rather limited. The Top Mounts can vary widely in terms of their water course, so installing them on top of the spindle and plumbing them to larger volume water/ mud pumps allows for greater flexibility in rotary or deep coring applications…
|
|
|
Sideport Water Swivel |
Top Mount Water Swivel |
Compact Sonic Swivel |
Back to Top PDF |
Sideport
or
Top Mount Swivel Assembly |
Top Connection |
Bottom Connection |
Water Course
(Inlet) Diameter |
Assembly Weight |
Assembly
Part Number |
Sideport |
AW Box |
AW Pin |
¾-inch
(19mm) |
10-Pounds
(4.5 kg) |
30009 |
Sideport |
1-1/8-inch
(29mm)
Hex Shank |
AW Pin |
1-inch
(25.4mm) |
10-Pounds
(4.5 kg) |
30001 |
Sideport |
1-1/8-inch
(29mm)
Hex Shank |
AWJ Pin |
1-inch
(25.4mm) |
10-Pounds
(4.5 kg) |
30002 |
Sideport |
1-5/8-inch
(41mm) |
AW Pin |
1-inch
(25.4mm) |
10-Pounds
(4.5 kg) |
30005 |
Sideport |
1-5/8-inch
(41mm) |
AWJ Pin |
1-inch
(25.4mm) |
10-Pounds
(4.5 kg) |
30010 |
Sideport |
1-5/8-inch
(41mm) |
NW Pin |
1-inch
(25.4mm) |
32-Pounds
(14.5 kg) |
30003 |
Sideport |
1-5/8-inch
(41mm) |
NWJ Pin |
1-inch
(25.4mm) |
32-Pounds
(14.5 kg) |
30004 |
Sideport |
1-5/8-inch
(41mm) |
NWJ Pin |
2-inch
(51mm) |
32-Pounds
(14.5 kg) |
30007 |
Sideport |
2-inch
(51mm) |
2-3/8”
Mayhew Junior
Pin |
2-inch
(51mm) |
45-Pounds
(20.4 kg) |
30008 |
Compact-Roto-Sonic
Sideport |
Bolt-Up Spindle
Flange |
Bolt-Up Spindle
Flange |
1-inch
(25.4mm) |
60-Pounds
(27.2 kg) |
31-01-02 |
Compact-Sonic
Sideport |
Uni-Thread
Box
with Spindle Clamp |
Uni-Thread Pin |
1-inch
(25.4mm) |
50-Pounds
(23 kg) |
30-41-10 |
Top Mount |
Heavy Duty Bail |
AWJ Pin |
1-1/4-inch
(32mm) |
40-Pounds
(18 kg) |
30051 |
Top Mount |
Heavy Duty Bail |
NWJ Pin |
1-1/2-inch
(38mm) |
50-Pounds
(23 kg) |
30050 |
Hydraulic Double-Rod-Clamp
Specify Drill Pipe, Casing or Drill Rod sizes when ordering
|
Hydraulic Double-Rod Clamps - are manufactured by USExploration Equipment Company and can be adapted to most multi-purpose or sonic & roto-sonic drilling rigs. Typically mounted to the base of the mast/ feed frame, these exceptional tooling systems hold rods & casing with the bottom clamp and break the joint with the top (rotating) clamp. This hands-free operation eliminates the need for pipe wrenches, cheater bars or hydraulic breakout wrenches. The operator can simply pull the tool string up through the double-clamp with the head and then crib the down-hole tooling with the bottom clamp, while the top clamp rotates the (exposed) rods or casing until the joint can be spun off and racked for the next hole. Each assembly includes a holding clamp, a breaking clamp & 8-jaw inserts…
Back to Top PDF |
Double-Rod Clamp Assembly
Breaks Rod with OD |
Assembly
Part Number |
2-1/2-inch (63.5mm) OD
thru
7-5/8-inch (193.7mm) OD |
7100-500-27164 |
2-1/2-inch (63.5mm) OD
thru
8-5/8-inch (219mm) OD |
7100-500-27165 |
Jaw Inserts
(8-Required) |
Assembly
Part Number |
Compact-Sonic Head
2-1/2-inch (63.5mm) OD
Thru
7-5/8-inch (193.7mm) OD |
500-27162 |
Compact-Roto-Sonic
2-1/2-inch (63.5mm) OD
thru
8-5/8-inch (219mm) OD |
500-27163 |
K-Series Tri-Seal Packer
|
K-Series Packers – also referred to as Tri-Seals are available from USExploration Equipment Company and are designed to seal around Schedule-40 or Schedule-80 PVC. Excellent for inhibiting flowing sands from migrating up or down the bore hole and typically made from neoprene rubber in two hardness ratings (Standard or Soft). When ordering simply specify the Rods and Casing that you are working with and the general down-hole conditions
Back to Top PDF |
K-Series Packer
Outside
Pipe Size |
K-Series Packer
Inside
Casing Size |
Coupling Type |
Special Feature |
Assembly
Part Number |
2-inch
(51mm) |
NW-Casing
3-inch
(76.2mm) |
Blank |
For
Schedule-40 PVC |
20207 |
2-inch
(51mm) |
HW-Casing
4-inch
(102mm) |
Blank |
For
Schedule-40 PVC |
20208 |
2-inch
(51mm) |
HQ-Wireline
3-inch
(76.2mm) |
Blank |
For
Schedule-80 PVC |
20205 |
2-inch
(51mm) |
HW-Casing
4-inch
(102mm) |
Blank |
For
Schedule-80 PVC |
20206 |
|
